Maintenance - Vacmaster EasyClean SCA0801 Manual

GB
WARNING: Remove the power cord from the power supply before carrying out any

maintenance.

1. Cleaning Exterior
1) Turn off and unplug carpet cleaner.
2) To clean exterior, or to reduce static electricity and dust build-up, wipe outer surface with a
clean, damp and soft cloth. Wipe dry after cleaning.
2. Cleaning Nozzle and Attachments
It is recommended to clean attachments with water after each use.
1) Press the tool release button to remove the attachment from the hose (Fig. 14).
2) Press the cover release button (
3) Rinse thoroughly with clean water. Allow the parts to dry before reinstalling. DO NOT wash in
the dishwasher. DO NOT install whist still damp.
4) Reinstall the nozzle cover and the insert back into place until a click is heard.
3. Cleaning the Filter Grill
1) Remove the dirty water tank from the side of the unit.
2) Remove any dirt and debris from the filter grill (
4. Storage
WARNING: Wrapping the power cord too tightly puts stress on the cord and could cause
damage. A damaged cord is an electrical shock hazard and could cause personal injury or
damage.
1) Replace suction hose and attachments in storage position.
2) Wrap the power cord loosely around the cord hooks. Attach plug retainer clip onto the power
cord.
3) Empty the clean water tank (if necessary). Rinse it out before replacing on the unit. Open the
clean water tank cap to allow it to air dry.
4) Empty the dirty water tank then rinse, clean and dry before placing back on the unit.
5) Store the carpet cleaner in a dry and cool indoor area.
MAINTENANCE
) on the nozzle to remove the cover (Fig. 15).
3
) as shown (Fig. 16).
4
10