Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vacmaster EasyClean SCA0801
Summary of Contents for Vacmaster EasyClean SCA0801
-
Page 4: Table Of Contents
® ® Thank you for purchasing this Vacmaster carpet spot cleaner. Feel confident that with Vacmaster you are obtaining a high-quality product that is engineered for optimal performance. This carpet spot cleaner is suitable for use with liquid materials. FOR YOUR SAFETY: CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS. -
Page 5: Safety Information
SAFETY INFORMATION READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS PORTABLE CARPET SPOT CLEANER. When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place so that the information is always available. - Page 6 • Do not handle the plug or carpet cleaner with wet hands. • To reduce the risk of health hazards from vapours or dusts, do not vacuum toxic materials. • Do not use or store near hazardous materials. • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
-
Page 7: Unpacking And Product Features
• Before starting work, the operating staff must be informed on - use of the carpet cleaner, - risks associated with the material to be picked up, - safe disposal of the picked up material. UNPACKING AND PRODUCT FEATURES Power Button Power Cord Hooks Tool Release Button Clean Water Tank... -
Page 8: Operation
OPERATION 1. Filling The Clean Water Tank 1) Remove the clean water tank from the side of the unit (Fig. 5). 2) Open the clean water inlet cap. Fill with warm water (Max 40°C) and solution. Ensure the correct proportion of water and carpet cleaning solution is used by referring to the solution label (Fig. - Page 9 2) Turn the quick release cord hooks to release the power cord (Fig. 8). 3) Plug the power cord into a power outlet. WARNING: If any abnormality/failure occurs, stop using the product immediately and disconnect the power plug. 4) Press the power button to turn the carpet cleaner on (Fig. 9). 5) For spills, first collect any excess liquid before using water/solution.
-
Page 10: Maintenance
MAINTENANCE WARNING: Remove the power cord from the power supply before carrying out any maintenance. 1. Cleaning Exterior 1) Turn off and unplug carpet cleaner. 2) To clean exterior, or to reduce static electricity and dust build-up, wipe outer surface with a clean, damp and soft cloth. -
Page 11: Troubleshooting
TROUBLESHOOTING WARNING: To reduce the risk of electric shock, unplug before troubleshooting. PROBLEM POSSIBLE CAUSE SOLUTION Unplugged at power outlet. Plug in firmly to suitable power outlet. Check with a good appliance. Be sure Defective power outlet. the power cord plug is fully plugged The cleaner is not into an electrical outlet. -
Page 12: Technical Data
PROBLEM POSSIBLE CAUSE SOLUTION Hose nozzle will Turn on the cleaner. If hose does not not spray after Air is trapped in the pump and spray, prime the pump by lowering filling the clean hose. the hose down to the floor and hold water tank. - Page 14 ② ① ③ ④...
- Page 16 SCA0801 Suzhou Cleva Electric Appliance Co., Ltd. No.8 Ting Rong Street Suzhou Industrial Park, Suzhou Jiangsu Province, China www.cleva-europe.com Made in P.R.C...