Vacmaster VJ507 Operator's Manual

Vacmaster VJ507 Operator's Manual

Wet/dry vacuums 5 gallon

Advertisement

Operator's Manual
Model No.

FOR YOUR SAFETY

Read and understand this manual before use.
Keep this manual for future reference.
www.vacmaster.com
Cleva North America
601 Regent Park Court
Greenville, SC 29607
5 Gallon
VJ507
Wet/Dry Vacuums
Part No. VL55BZ.20.60 V03

Advertisement

Table of Contents
loading

Summary of Contents for Vacmaster VJ507

  • Page 1: For Your Safety

    Wet/Dry Vacuums Operator’s Manual 5 Gallon VJ507 Model No. FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. www.vacmaster.com Cleva North America 601 Regent Park Court Greenville, SC 29607 Part No. VL55BZ.20.60 V03...
  • Page 2: Table Of Contents

    CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS WARRANTY We take pride in producing a high quality, durable product. This Vacmaster® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use.
  • Page 3: Safety Instructions And Warnings

    Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this Wet/Dry Vac only as described in this manual. To reduce the risk of personal injury or damage to your Wet/Dry Vac, use only Vacmaster® recommended accessories. For Household Use Only.
  • Page 4: Double Insulation Instructions

    DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac.
  • Page 5: Unpacking And Checking Carton Contents

    UNPACKING AND CHECKING CARTON CONTENTS Remove entire contents of carton. Check each item against the carton contents list. Carton contents lists Description……………………………...QTY Vac Assembly……………………..……. Hose…………………………….……….. Handle…………………………………… Casters…..……………………..….. Extension Wands………………….……. 2-in-1 Floor Brush/Squeegee…..……… Dust Filter.………………...………. Foam Sleeve Filter.…………..…….….. Bag with 2 Screws……..….…...………. Operator’s Manual……..….…...……….
  • Page 6: General Assembly Instructions

    GENERAL ASSEMBLY INSTRUCTIONS A Philips head screw driver is required WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1. Verify that the power cord is disconnected from the outlet. (fig.1) 2.
  • Page 7: Dry Vacuum Operation

    DRY VACUUM OPERATION DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO;...
  • Page 8: Liquid Vacuum Operation

    LIQUID VACUUM OPERATION LIQUID VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO;...
  • Page 9: Blowing Operation

    BLOWING OPERATION This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER. WARNING: KEEP BYSTANDERS CLEAR FOR BLOWING DEBRIS. WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED.
  • Page 10: Installing & Cleaning Dust Filter

    IMPORTANT! Clean or change the dust filter regularly for best performance. ALWAYS USE DUST FILTER FOR DRY VACUUMING. If the machine is used with out the dust filter, the motor will burn out and the warranty will be voided. Always keep spare filters on-hand. NOTICE! The filter included is made of high quality material designed to stop small dust particles.
  • Page 11: Troubleshooting

    Cleaning Foam Sleeve Filter 1. With the removed power head in the upside down position, carefully remove foam sleeve filter. (fig. 4) 2. Use a mild soap and water solution to wash foam sleeve filter and rinse with clean water. (fig. 5) 3.
  • Page 12: Exploded View And Parts List

    EXPLODED VIEW AND PARTS LIST...

Table of Contents