Operation - Vacmaster EasyClean SCA0801 Manual

GB
1. Filling The Clean Water Tank
1) Remove the clean water tank from the side of the unit (Fig. 5).
2) Open the clean water inlet cap. Fill with warm water (Max 40°C) and solution. Ensure the
correct proportion of water and carpet cleaning solution is used by referring to the solution label
(Fig. 6).
SMALL CLEANING AREA - 0.8L Liquid (
LARGE CLEANING AREA - 2.5L Liquid (
Do not exceed filling the clean water tank over the maximum fill line indicated on the clean
water tank.
CAUTION: Do not fill with water above 40°C.
NOTE: A 236ml bottle of solution is provided with this carpet cleaner. Ensure the solution and
water are mixed correctly. Once Sample bottle is depleted, the solution can be replaced with a
high-quality carpet solution.
CAUTION: The carpet solution can cause serious skin and eye irritation. Wash
affected area cautiously with water for several minutes. If irritation persists, seek
medical attention immediately. Individuals with sensitive skin should wear rubber
gloves. Wash hands thoroughly after use. Do not ingest. Keep out of reach of
children.
3) Secure the tank inlet cap back into place (Fig. 7).
4) Slide the clean water tank back onto the unit.
2. Using Your Machine
IMPORTANT: Before using the carpet cleaner, thoroughly vacuum the area to be cleaned. Always
test a small hidden area for colorfastness and pile distortion.
Test Colorfastness - Gently rub surface with a dampened white cloth containing cleaning solution.
Wait 10 minutes and check for color removal with a white paper towel. If color changes, do not
use.
NOTE: To prevent staining, please use plastic, wax paper or aluminum foil to protect wood or
metal surfaces from possible water spray.
To protect the wooden floors underneath rugs or carpet, place protective material (e.g. plastic)
underneath them before cleaning.
NOTE: Always refer to and follow the manufactures care guidelines before using carpet cleaning
solution and carpet spot cleaner.
1) Unwrap the hose. Select the preferred attachment and make sure it is attached securely.
Tough Stain Nozzle: For cleaning carpets, rugs, upholstery and hard-to-reach surfaces.
Wide Path Nozzle: For cleaning stairs and larger areas.

OPERATION

)
1
)
2
8