Requirements Concerning The Workforce, Personal Protective Gear, Workplaces - Honeywell HON 380 User And Maintenance Instructions

Operator's duties op-
posite the employees
Conduct in the event
of accidents
3.2 Requirements concerning the workforce, personal protective gear,
workplaces
Requirements con-
cerning the workforce
HON 380 gas pressure regulator with HON 673/674 controller
In your capacity as the company operating the device, you must ensure the fol-
lowing:
 All personnel must meet the requirements corresponding to their duties.
 All personnel must read and understand this user manual before working
with/on the device.
 All occupational health and safety regulations that apply in your country
must be complied with.
 Hazards resulting from specific working conditions at the location where the
device is being used must be determined by means of a risk assessment and
rendered avoidable by means of appropriate operating instructions.
 All personnel must be provided with the personal protective equipment re-
quired for their work. This personal protective equipment must be in good
condition at all times.
 All personnel must wear the personal protective equipment required for their
work.
The device is designed and built such that the employees can work with it without
being at risk. In spite of all the precautions, accidents can happen under unfavor-
able circumstances. Always consult the directives of your company concerning
the protection of the workforce.
Individuals tasked with handling the device must meet the following require-
ments:
Personnel Responsibilities
Skilled person or ex- Any work on and with the de-
pert vice
Certified, indepen-
Safety checks
dent competent per-
son
Carrier Company-to-company trans-
port
Transportation per-
Intra-company transport
sonnel
Required qualification
 Professional training and expe-
rience operating pressure
equipment and systems
 Knowledge of the relevant
standards and regulations
 Ability to identify and avoid
dangers autonomously
 Professional training
 Knowledge of the relevant
standards and regulations
 Ability to identify and avoid
dangers autonomously
 Professional training and expe-
rience transporting pressure
equipment and systems
 Knowledge of the relevant
standards and regulations
 Ability to identify and avoid
dangers autonomously
 Knowledge with securing hau-
ling distances
 Knowledge with the use of
hoisting equipment
Professional training and experi-
ence with the transport using
stackers, etc.
Safety
20