Table of Contents
Advertisement
D
4500 R
RYSTAR
EFERENCE MANUAL
Changing the Netmask
Perform steps 1 to 2 of the
1
page 57.
On the 'Change setting' screen, press the Down key three times, followed by the
2
Confirm key to select 'Network-Dicom'.
The 'Network-Dicom' screen is displayed:
7 Remove modality
8 Add modality
On the 'Network-Dicom' screen, press the Down key four times, followed by the
3
Confirm key to select 'Netmask'.
The 'Netmask' screen is displayed:
If the IP-address has already been assigned, it will be shown on the display.
When no DHCP server is available and when the subnet mask of the printer has
never been set, the printer subnet mask will be set to the APIPA address
255.255.0.0.
Enter the Netmask by means of the arrow keys. Refer to
4
Note that blank spaces will not be filled in (see examples on the next page).
76
Advanced operation (key-operator mode)
'Accessing the Change settings menu'
procedure on
e.g. 255.255.252. 0
'Data entry'
on page 25.
2800E EN 20050215
Advertisement
Chapters
Table of Contents
Troubleshooting
