Switching On The Drystar 4500 - AGFA Drystar 4500 Reference Manual

D 4500 R
RYSTAR EFERENCE MANUAL

Switching on the Drystar 4500

Before switching on the Drystar 4500, read the safety instructions. Refer to
'Security precautions'
Follow the procedure below to ensure proper start-up of the Drystar 4500 and
to check that everything is working correctly.
Check that the power cord is plugged in and then switch on the printer by
1
pressing the Power/Reset button.
OWER
On the display, the following message is displayed. After a short while, a progress
indicator will show the proceeding of the self test.
The printer is ready for operation:
2
If, on the front panel display, the READY message is shown, the status
•
indicator LED is constant green.
If, on the front panel display, the 'Print queue' screen is shown, the status
•
indicator LED is green and blinking.
<Modality name>
<Modality name>
<Modality name>
<Modality name>
26
Introducing the Drystar 4500
on page 12.
10:21:34 PRINTING
10:21:34 CALCULATING
11:35:27 WAITING
11:54:02 WAITING
2800E EN 20050215