Figure 4-7. Advant Fieldbus 100 Using Bus Redundancy Connected To Advant Controller 450 - ABB Advant Controller 450 Product Manual

Advant Controller 450 Product Guide
Chapter 4 Hardware Components
4-8
Advant Fieldbus 100 using Bus Redundancy
Only twisted pair media is shown.
AC 450
2 x TK803
TC516
TC505
T

Figure 4-7. Advant Fieldbus 100 using Bus Redundancy connected to Advant Controller 450

For connection to a coaxial bus 4 x TC 625 and 4 x TK516 are required instead of
2 x TC516 and 2 x TC505.
RCOM/RCOM+
AC 450
TK595
TC562
Figure 4-8. RCOM/RCOM+ connected to Advant Controller 450
Bus redundancy can be achieved by using two single buses.
SC510 or SC520
2 x CI522A
2 x TK803
TC516
TC505
T
NOTE
SC510 or SC520
CI532V01
NOTE
Bus redundancy with
twisted pair media
Single bus
3BSE 015 953R201 Rev B