Optional Program Module Qc07-Fuz41; Optional Program Module, Qc07-Opf41; Optional Program Module, Qc07-Los41; Table 3-6. Additional Pc Element In Program Module Qc07-Fuz41 - ABB Advant Controller 450 Product Manual

Advant Controller 450 Product Guide
Chapter 3 Software Components

3.4 Optional Program Module QC07-FUZ41

3.5 Optional Program Module, QC07-OPF41

3.6 Optional Program Module, QC07-LOS41

3-6
The Optional program module QC07-FUZ41 extends the functionality of the controller with the
FUZZYCON allowing the user to specify the control algorithm using Fuzzy Control, which is
an applied science of Fuzzy Theory. Moreover, the function supports multi variable input and
multi variable output, i.e. several controlled variables and manipulated variables can be handled
simultaneously. To the operators, FUZZYCON exposes the same "look and feel" as other
functions, for example PIDCON, with respect to object displays and dialogs. This is also true
for other run time features and most of the engineering tasks.

Table 3-6. Additional PC element in program module QC07-FUZ41

Type
Element for Fuzzy Control
The Optional program module QC07-OPF41 extends the functionality of the controller with
support for operator station functions in for example Advant Operator Workplace.
The Optional program module QC07-OPF41 extends the functionality given by the Basic
program module with the following functions:
• Functional units, binary
• Functional units, analog
• Functional units, PID loop control, PIDCON
• Functional units, motor and valve control, group start
• Support for AdvaCommand Functions
(Subscription, Order/Presentation, System Status, Status List, Trend, Event/Alarm)
• Log data storage
• Group alarm, a function in AdvaCommand Event and Alarm.
Optional program module QC07-LOS41 extends the functionality of the controller with
MasterView 320. A VT100 terminal (or compatible) is used as operator interface.
Four such terminals can be connected to an Advant Controller 450, thus providing four local
operator workplaces. Optional program module QC07-LOS41 extends the functionality given
by the Basic program module with the following functions:
• MasterView 320
• Reports for MasterView 320.
1. The PC elements and database parts are included in QC07-BAS41 and QC07-LIB42. The presentation and dialog
support are included in QC07-OPF41.
FUZZYCON
1
1
1
, PIDCONA
PC element
1
1
3BSE 015 953R201 Rev B