ABB Advant Controller 450 Product Manual page 91

3BSE 015 953R201 Rev B
Description
Bus controller for RCOM/RCOM+
for connection of two buses to AC 450. Used
without modems up to 15 m (49 ft.) bus length.
Bus controller for MODBUS
for connection of two buses to AC 450. Used
without modems up to 15 m (49 ft.) bus length.
Bus controller for MODBUS for connection of
two buses to AC 450. Used without modems up
to 15 m (49 ft.) bus length.
Bus controller for Siemens 3964(R) for con-
nection of two buses to AC 450. Used without
modems up to 15 m (49 ft.) bus length.
Bus controller for Allen-Bradley DF1 for con-
nection of two buses to AC 450. Used without
modems up to 15 m (49 ft.) bus length.
Free-programmable module
A MVI module programmable in C
Modem for CI532Vxx, CI534Vxx, CI535 or
CI538 24 V d.c. Short distance modem for cable
length:
15 < L < 1000 m at 19200 bit/s.
15 < L < 12000 m at 1200 bit/s
WxHxD = 55x100x128 mm (2.2x3.9x5.4 inch)
Connection cable between CI532Vxx,
CI534Vxx, CI535 or CI538, and modem TC562,
length 3m (10 ft.).
(1) The software development environment is not included and can no longer be purchased. Please contact ABB
Automation Products AB Dept. LF for information about software development for the module .
Advant Controller 450 Product Guide
Table 8-26. Multi Vendor Interfaces
CI532V01
CI532V02
CI534V02
CI532V03
CI534V04
CI535
(1)
TC562
TK595
Consists of Article No.
3BSE003826R1
3BSE003827R1
3BSE010700R1
3BSE003828R1
3BSE010702R1
3BSE003830R1
3BSC630049R1
3BSE006830R1
8-13