Page 1
OPERATING INSTRUCTIONS Translation of the original instructions Translation of the original instructions OME 25 HP - OME 25 HP+ OME 25 HP - OME 25 HP+ Oil mist eliminator and Oil drain kits Oil mist eliminator and Oil drain kits...
Used with the OME 25 HP/HP+ oil mist eliminator, it allows to re-inject the filtered oil, accumulated in the oil mist eliminator through the gas ballast. It consists of a drain pipe which is connected on one end to the bottom of the OME 25 HP, and on the other end to the inlet of the gas ballast.
Trapping: 99.99% of vapor droplets greater Filtration level than 0.6 microns in diameter. than 0.3 microns in diameter. The OME 25 HP and OME 25 HP+, are delivered with the following connections accessories: Reference Description (see Figure 1A/1B) 1 centering ring DN25 ISO-KF...
Page 5
Screw the connector (53) in the bottom of the OME 25 HP with a thin spanner 12 mm and install the 4/6 Rilsan pipe on the connector and secure with the nut. Cas 4: The oil mist eliminator is equipped with ODK2’s kit (Figure 2b) •...
- the exhaust valve can move, so the exhaust is not blocked, - the exhaust valve can move, no overpressure in the oil case. Page 5 Pfeiffer Vacuum SAS - Operating Instructions OME 25 HP / OME 25 HP+...
The connection of the drain port to a circuit collectory expelled liquid unsures an automatic purge. In this case, connect the circuit collectory expelled liquid to a gas collector. a2) When the OME 25 HP/HP+ is equipped with an oil drain kit ODK1 or ODK2 •...
OME 25 HP / OME 25 HP+ Page 15 Pfeiffer Vacuum SAS - Operating Instructions OME 25 HP / OME 25 HP+...
Page 17
VACUUM SOLUTIONS FROM A SINGLE SOURCE VACUUM SOLUTIONS FROM A SINGLE SOURCE Pfeiffer Vacuum stands for innovative and custom vacuum solutions worldwide, Pfeiffer Vacuum stands for innovative and custom vacuum solutions worldwide, technological perfection, competent advice and reliable service. technological perfection, competent advice and reliable service.
Need help?
Do you have a question about the OME 25 HP and is the answer not in the manual?
Questions and answers