Rs485 Settings - LINOVISION IOT-C50 Series Quick Start Manual

Parameters
Reporting Interval
The device returns
to the power supply
state
Change Password

4.3.1 RS485 Settings

1. Connect RS485 device to RS485 port on interface 2. If you need IOT-C50x to power the RS485
device, please connect the power cable of RS485 device to 5V/9V/12V or 3.3V power output on
interface 2.
2. Go to "General ->Serial" of ToolBox software or "Setting ->Serial Setting" to enable RS485
and configure serial port settings. Serial port settings should the
devices.
Reporting interval of transmitting data to network server. Default: 20
mins, Range: 1-1080mins.
Note: RS232 transmission will not follow the reportinginterval.
If the device loses power and return to power supply, the device will be
on or off according to this parameter.
Change the password for ToolBox APP or software to read/write this
device.
Description
same as RS485 terminal
13