Internal Interfaces - LINOVISION IOT-C50 Series Quick Start Manual

2.3 Internal Interfaces

DIP Switch:
Interface
Power Output
Analog Input
RS485
Note:
1) Analog inputs are set to 4-20mAby default, power outputs are set to 12V by default.
2) Power output on interface 1 is used for powering analog devices, power output on interface 2
is used for poweringserial port devices.
Power Button:
Function
Turn On Press and hold the button for more than 3s.
Turn Off Press and hold the button for more than 3s.
Reset Press and hold the button for more than 10s.
Check
Quickly press the power button.
On/OffStatus
DIP Switch
12V: 1 on 2 off 3 off
9V: 1 off 2 on 3 off
5V: 1 off 2 off 3 on
4-20mAADC: 1 off 2 on 3 on
0-10VADC: 1 on 2 off 3 off
Add 120Ω resistor between A and B: 1 on 2 off 3 off
Add 1k Ωpull-upresistor on A: 1 off 2 on 3 off
Add 1k Ω pull-downresistor on B: 1 of 2 off 3 on
Action LED Indication
Off →
→ Off
Blinks.
: Device is on.
Light Off: Device is off.
6