Table of Contents
Advertisement
4.2 CommunicationSettings
4.2.1 LoRaWAN Settings (LoRaWAN Version Only
LoRaWAN settings is used for configuring the transmission parameters in LoRaWAN
and is only appliedto
Basic LoRaWAN Settings:
Go to "LoRaWAN Settings -> Basic" to configure join type, App EUI, App Key and other
information. You can also keep all settings by default.
Parameters
Device EUI
Unique ID of the device on the label.
App EUI
Default App EUI is 24E124C0002A0001.
The port used for sending and receiving data (RS232 data excluded), default
Application Port
port is 85.
Working Mode
Fixed as Class C.
Join Type
OTAA and ABP modes are available.
Application Key
Appkey for OTAA mode, default is 5572404C696E6B4C6F52613230313823.
Device Address
DevAddr for ABP mode, default is the 5
Network Session
Nwkskey for ABP mode, default is 5572404C696E6B4C6F52613230313823.
version.
Description
th
th
to 12
digits of SN.
®
network
11
Advertisement
Table of Contents
