Interface Settings - LINOVISION IOT-C50 Series Quick Start Manual

If frequency is one of CN470/AU915/US915, you can enter the index of the channel that you
want to enable in the input box,making them separated by commas.
Examples:
1, 40: Enabling Channel 1 and Channel 40
1-40:Enabling Channel 1 to Channel 40
1-40,60:Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
Note:
For -868Mmodel, default frequency is EU868;
For -915Mmodel, default frequency is AU915.

4.3 Interface Settings

IOT-C50x series support data collection by multiple interfaces including GPIOs, analog inputs and
serial ports. Besides, it can also power the terminal devices by power output interfaces. Basic
settings are as follows:
Go to "General ->Basic" of ToolBox software or "Setting ->General Settings" page to change
the reporting interval.
12