Table of Contents
Advertisement
2. Download and install "Linovision ToolBox" App from Google Play or App Store.
3. Enable NFC on the smartphone and open Linovision ToolBox.
4. Attach the smartphone with NFC area to the device to read device information.
5. Basic information and settings of the device will be shown on ToolBox if itʼs recognized
successfully. You can read and configure the device by tapping the Read/Write button on the
App. In order to protect the security of devices, password validation is required when first
configuration. The default password is 123456.
Note:
1) Ensure the position of smartphone NFC area and itʼs recommended to take off phone case.
2) If the smartphone fails to read/write configurations via NFC, move the phone away and back
to try again.
3) IOT-CPANEL can also be configured by ToolBox software via dedicated NFC reader
provided by Linovision IoT.
3.2 LoRaWAN Settings
LoRaWAN settings are used for configuringthe transmission parameters in LoRaWAN
Basic LoRaWAN Settings:
Go to Device ->Setting ->LoRaWAN Settings of ToolBox App to configure join type, App EUI, App
Key and other information. You can also keep all settings by default.
®
network.
6
Advertisement
Table of Contents
