2.4 Dimensions (mm)
3. HardwareSwitch
When using the analog input or power output of IOT-C50x series, please follow the steps to switch
the workingmode of hardware interface:
1. Remove the screw caps and take off the roof cover.
2. Change DIP switches that are related analog inputs and power outputs as shown in
Section
2.3.
3. Put back the roof cover and screw the screws.
Note: turn off the device before changing DIP switches.
4. Operation Guide
4.1 Log in the ToolBox
IOT-C50x series can be configured via NFC or Type-Cport. Please select one of them to complete
configuration.
7