Run Analogue Output Test; Run Bump Test - Prosense PQ Series User Manual

If fault relay test selected, detector will activate the relay and screen will display information:
If alarm relay selected, detector will activate related alarm relay and screen will display
information:
To return back to previous screen please press Enter key till the screen updated with previous
menu items.

Run Analogue Output test

To test analogue output level user can initiate the analogue output test in Test menu. Once
Analogue Output option selected press Enter Key. Screen will display the analogue output
level. User can increase or decrease the output signal level via using up and down keys.
To return back from Analogue Output test please press Enter key till the screen updated with
previous menu items.

Run Bump Test

Bump test can be run at any time when needed. The Bump test runs depending of the
parameters defined for bump test in configuration details. To initiate bump test please select
PRS-UM-HT-EN-Rev1.0-19.12.2022
1. Fault Relay
2. Alarm 1 Relay
3. Alarm 2 Relay
4. Previous Menu
Fault Relay
is active
Alarm 1 Relay
is active
Analog Output
02.0 mA
15