Display Event Logs; Display Concentration Trends; Display Measurements - Prosense PQ Series User Manual

Display Event Logs

Detector records all events starting from its power-on. To display recorded events, select
Event log option in Information menu. Detector will list the events:
The screen can display only one event. To see all events use up and down keys. All events
starting from first power-on has been saved in detector memory. It can store up to 250
events. Event log feature is only available on PQ series.

Display Concentration Trends

PQ detector can show gas concentration trends in screen as it is recording all the
measurement data in last 8 hours. Once this option selected a graphic screen will shown to
display gas measurements:
To return back to previous menu please press Enter key till the screen changes. This log

Display Measurements

feature is only available on PQ series.
To get more details about the measurements please select measurements option in
Information menu. Detector will display the voltage, current and temperature levels as in
below example:
PRS-UM-HT-EN-Rev1.0-19.12.2022
Log[001]
08 AUG 18 11:08
ALARM AL1
100
------------------------
------------------------
-------------------------------------------------- T
Input Vol. :23.3V
Sensor Vol. :2506mV
Sensor ADC :504
Current Output :4mA
Line Res. :300 Ohm
Temperature :34C
12