Descriptions of Available Connections
USB PORT
Linking with USB flash disk for remote data transfer.
TCP/IP PORT
Connect with a CAT 5 cable for LAN connection, one end to terminal's port and
another end to the computer's TCP/IP Port.
TCP/IP for Single Connection
Linking the terminal to a single computer using TCP/IP
requires Ethernet 10/100Base-T Crossover Cable. The
cable can be used to cascade hubs or to connect Ether-
net stations back-to-back without a hub. It works with
both 10Base-T and 100Base-TX.
TCP/IP for Network Connection
Linking the terminals to multiple computers using TCP/IP requires Ethernet 10/100Base-T Straight Thru
Cable or "whips". The cable works with both 10Base-T and 100Base-TX, connecting a network interface
card to a hub or network outlet.
CONNECTOR PIN
TX+
TX-
RX+
RX-
POWER SUPPLY PORT
Insert the Power Adapter point to this port for power.
RS485/WIEGAND INPUT CONNECTION PORT
RS485 Single Connection:
RS485 Network Connection:
Wiegand Output:
14
CONTENTS
1
TOP
FRONT
1
CABLE COLOR
•
1
White/Orange
•
2
•
3
•
4
•
5
•
6
•
7
•
8
Connection to a single computer using RS485 wire.
Connection to multiple computers using Daisy Chain connection.
Connecting with third party connector or terminal(s).
8
8
JOINT 1 PIN
TX+
TX-
RX+
RX-
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
JOINT 2 PIN
•
•
1
3
RX+
•
•
2
6
RX-
•
•
3
1
TX+
•
•
6
2
TX-
CONNECTOR
•
1
TX+
•
2
TX-
•
3
RX+
•
4
•
5
•
6
RX-
•
7
•
8