FingerTec i-Kiosk 100 User Manual page 24

9 • AUTO TEST
Who should do the Auto Test?
The Auto Test page is to diagnose or analyze the conditions in the i-Kiosk 100. There
are several tests available in the Auto Test page and only an administrator is allowed
to perform the test. Before running any tests, kindly contact your reseller for advice
or you could email support@fingertec.com.
Audio Test
Audio Test determines the quality of the i-Kiosk 100's audio. Every click on the screen
will emit different voice message. If you find any distorted sound in any of the voice
messages or instructions, kindly send your terminal for checking and repair. To run
test: Press Menu > Auto Test icon > Audio Test.
Keyboard Test
The Keyboard Test is for you to check the condition of the keyboard. Press Menu >
Auto Test icon > Keyboard Test.
Sensor Test
This test is to determine the condition of the fingerprint optical scanner you need
to run fingerprint test. Once you run the sensor test, the i-Kiosk 100 will display a
white square on the screen. Place your finger on the scanner. If you can see your fin-
gerprint on the white square, the optical scanner works fine. Otherwise, kindly send
your i-Kiosk 100 for checking and repair. To run test: Press Menu > Auto Test icon >
Sensor Test
RTC Test
Time is an essence for the i-Kiosk 100 and it should not be compromised. The RTC
Test will display date, time, 0 (s): 0 (ms)Click the screen to start the test. The 0 (s): 0
(ms) will start to run and every 10ms change the second to 1. If it doesn't run as it
should, kindly send your i-Kiosk 100 for checking and repair. To run test: Press Menu
> Auto Test icon > RTC Test
24 CONTENTS