ABB Advant Controller 80 User Manual page 47

Essential Settings for
ACS 600 MultiDrive
AC 80 User's Manual
Note that only the user-adjustable settings are represented here.
DRIDS
NAME Max. 20 characters, e.g. dataset_MultiDrive
ACT 1
DS_NO Dataset number (10, 12, 14, ..., 32)
WR_ENA 1 (Must be forced by a connection from the PC section)
DRIENG
Base part:
NAME Max. 20 characters, e.g. MULT_DR_OP_MODULEBUS
POSITION 100 + address of the drive. See below.
IMPL 1
TYPE ACS 600 ENG
Defining the value of POSITION:
Position on
Setting of drive
Optical
parameter 70.01
ModuleBus
1 17
2 18
3 19
• • • • • •
12 28
Parameter part:
APPID 0
Reference part:
REF1 Max. 20 characters, e.g. dataset_MultiDrive
REF2 Max. 20 characters
• • • • • •
REF10 Max. 20 characters
Chapter 4 – Programming the AC 80
DRIENG POSITION setting
(100 x Cluster + Position)
101
102
103
• • •
112
4-9