Table of Contents
Advertisement
For a Fixed (Static) IP Address
If you have a fixed IP address, use this procedure to configure the modem to work with your
ISP. You'll need the information you filled in on page 4. You configure your modem using
Internet browser software such as Microsoft® Internet Explorer 5.0 or Netscape Navigator®
4.7 or later.
1. Start a browser on the computer connected to the modem.
2. In the Address or Location box, type http://192.168.0.1 and press Enter or Return.
Note: You may want to bookmark this address in your browser for handy access in
the future.
3. Type admin in the User Name box.
4. Type password in the Password box.
Note: Both User Name and Password are case sensitive.
5. Click OK.
The modem's Basic Settings page appears.
6. Click Device Mode in the Advanced section.
7.
Select DM602 (Modem) as the device type and click Apply.
The Basic Settings page appears.
8. Fill in the form on the Basic Settings page. (Refer to the information filled in on page 4.)
Note: Helpful information appears on the right side of the page to assist you as you
fill in the form. You may also find pertinent information in the ISP guide on the CD.
10. Click Apply to have your information sent to the modem.
11. Click Logout.
Test the Connection
1. In your browser's Address or Location box, type www.NETGEAR.com and press Enter or
Return.
This should take you to NETGEAR's Web site.
Note: If NETGEAR'S Web site doesn't appear, go to Troubleshooting on page 11.
2. Quit your browser.
10
Advertisement
Table of Contents
