Activate Your Internet Service With Xfinity; Perform A Speed Test - NETGEAR Nighthawk CM2050V User Manual

Nighthawk CM2050V 2.5 Gbps Ultra-High Speed Cable Telephony Modem

Activate Your Internet Service With Xfinity

Before you start the self-activation process, collect the following information:
• Personal information associated with your Xfinity account (you need one of the
following):
- Mobile phone number
- Xfinity user name and password
• Xfinity account number
• Cable modem model number, which is CM2050V
• Cable modem serial number
• Cable modem MAC address
• Cable modem MTA MAC address
Your cable modem's serial number and MAC address are on the cable modem label.
Note: If you have Xfinity Voice, ask Xfinity to register the phone lines.
To activate your Xfinity Internet service:
1. Close all web browsers.
2. Launch a web browser.
You are redirected to the Xfinity self-activation page. If you are not redirected to the
Xfinity self-activation page, visit xfinity.com/activate.
3. Provide your Xfinity credentials and complete the self-activation process.
This process might take up to 10 minutes, during which the cable modem reboots
twice.
Note: If you're unable to activate your Xfinity Internet service using the self-activation
page, call Xfinity customer service at 1-800-XFINITY (1-800-934-6489).

Perform a Speed Test

To determine the accurate Internet speed, visit speedtest.xfinity.com/ and perform a
speed test.
If your actual speed is lower than your subscribed speed, contact XFINITY.
Hardware Setup 13 User Manual