Table of Contents
Advertisement
Configure the Modem and Test the
4
4
Connection
For PPPoE or PPPoA access
If you have PPPoE or PPPoA access through your ISP, use this procedure to configure the
modem to work with your ISP. You'll need the information you filled in on page 4. You
configure your modem using Internet browser software such as Microsoft® Internet Explorer
5.0 or Netscape Navigator® 4.7 or later.
Note: If you normally use a login program to access the Internet, do NOT start that
program now.
1. Start a browser on the computer connected to the modem.
2. In the Address or Location box, type http://192.168.0.1 and press Enter or Return.
Note: You may want to bookmark this address in your browser for handy access in
the future.
3. Type admin in the User Name box.
4. Type password in the Password box.
Note: Both User Name and Password are case sensitive.
5. Click OK.
The modem's Basic Settings page appears.
6. Fill in the form on the Basic Settings page. (Refer to the information filled in on page 4.)
Note: Helpful information appears on the right side of the page to assist you as you
fill in the form. You may also find pertinent information in the ISP guide on the CD.
7. Click Apply to have your information sent to the modem.
Note: You will no longer need to use a login program to get online nor manually
disconnect. If you want to continue using a login program, click Device Mode in the
Advanced section and select DM602 (Modem) as the device type. Then click
Apply.
8. Click Logout.
9. Go to Test the Connection on the next page.
9
Advertisement
Table of Contents
