Table of Contents
Advertisement
For Windows, the Network Properties should have Obtain an IP address automatically
selected (see page 6). For Macintosh computers, the TCP/IP (or Network) control panel
should be set to Using DHCP Server (see page 7).
•
You may also verify that the modem's local IP address is 192.168.0.1. The computer's IP
address should be between 192.168.0.2 and 192.168.0.254.
Resetting TCP/IP Properties (Windows)
If you're on a Windows computer and are still having problems, you may try the following
procedure before contacting technical support.
Windows 98/Me
1. Click the Start button and
then click Run.
2. Type winipcfg and then
click OK.
3. Select your Ethernet adapter.
For any Windows computer, if you are using the recommended default TCP/IP settings,
they should be:
4. Click More Info and verify
that the DNS Servers box
displays 192.168.0.1.
5. Click Release All and
then Renew All.
6. Verify that there is a valid
address and click OK.
12
Windows 2000
1. Click the Start button
2. Type CMD and
3. Type ipconfig/all.
• IP Address: between 192.168.0.2 and 192.168.0.254
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.0.1
4. Type ipconfig/release.
5. Type ipconfig/renew.
6. Verify that there is a
Note: If you're still having problems, check the
troubleshooting section in the Reference Manual.
and then click Run.
click OK.
valid address and close
the window.
Windows XP
1. Open My Network Places.
2. Click View network
connections (Network Tasks).
3. Click your enabled LAN
connection.
4. Click Repair this
connection (Network Tasks).
5. Verify that there is a valid
address and close the
window.
Note: For Windows XP, you'll
find the TCP/IP information in
the Details area.
Advertisement
Table of Contents
