ZAPTEC Go Installation Manual page 10

English
6. Configure charging station
Before you begin, install the Zaptec App
from the App Store (iOS) or Google Play Store
(Android) and make sure the Bluetooth
on your phone is switched on.
When the Zaptec Go charger is switched on,
the status indicator will be orange.
This means it is ready to be configured.
To configure the Zaptec Go
with a Zaptec account
1. Open the Zaptec app and log in with
your Zaptec account
2. From the Home, tap the symbol
3. Select the "Install product" button
4. Scan the QR code located inside
the charger
5. Set the installation details (circuit breaker
size, maximum current and country)
6. If the settings are set correctly, tap
Finish
10
Scan here for the
configuration video
To configure the Zaptec Go
without a Zaptec account
1. Open the Zaptec App
2. Tap "Install a charging station"
3. Scan the QR code that is located
inside the charger
4. Set the installation details (circuit
breaker size, maximum current and
country)
5. If the settings are set correctly,
tap Finish
Zaptec