Software And Options - Schiller Cardiovit AT-10 Service Handbook

SCHILLER AT-10 ECG and Spirometry Unit
SERVICE HANDBOOK Issue c April 2002

Software and Options

To check the software version of the unit and to display all the systems options that have been
installed, proceed as follows:
Display the software option screen by pressing the key sequence:
Note: The actual key sequence may change slightly for different software versions.
The software version and the installed options are displayed on the LCD as follows:
•
<ECG> <6> (Electrode test) <.> (period)
The top line gives the equipment name and the overall system software
version of the unit; that is the software version of the EPROMs in the
Program Pack. This is followed by a combination of characters to
indicate the type of software (or basic options) that is installed. These
are as follows:
• C - Interpretation Program
• V - Frank Vector Loops
• S - Standard
• M - Measurement
The measurement program is integral to the interpretation program,
thus when the interpretation program is installed, by default the
measurement program is also installed. Full details of all the software
versions are given in the AT-10 Operating Handbook.
Chapter 5
Functional Checks & Adjustments
Page 5.21