How To Assemble - Martec Ariel Series Manual

HOW TO ASSEMBLE

1. Secure the hanging bracket to ceiling beam or a suitable piece of timber inserted
between the ceiling beams. Martec Pty Ltd recommends the bracket be attached
with four (4) long wood screws as supplied within the packaging. (See Fig 1)
NOTE: Martec Pty Ltd assumes that the installation of this ceiling fan is carried out
as per the instruction manual i.e. mounted to a solid timber structure. It is the
purchasers responsbility to ensure that the installatin electrician has carried out the
installation of this ceiling fan as per the instruction manual. Should any noise
emintate from this ceiling fan, it is the purchasers responsbility to have their electrician
check the installation of the fan. Steel beams, grid ceilings and flexible surfaces will
not absorb vibration and may cause some audible noise due to the vibration. This
is not a fault of the fan ans as such is not covered under warranty.