Table of Contents
Advertisement
Updating the Limits or Cable Types Database
Fluke Networks may release a test limits or cable types
database that is not part of a software update. To install a
new database in your tester, use the Modify DTX Test
Limits utility in LinkWare software. See the LinkWare online
help for details.
Cleaning
Clean the display with glass cleaner or isopropyl alcohol and
a soft, lint-free cloth. Clean the case with a soft cloth
dampened with water or water and a mild soap.
To avoid damaging the display or the case, do not
use solvents or abrasive cleansers.
Retraining the Battery Gauge
The accuracy of the battery gauge may drift over time if the
battery is frequently recharged before being fully
discharged. Retraining the battery gauge restores its
accuracy.
Retraining can take 17 to 30 hours. The time is shorter if
you start with the batteries discharged.
Caution
Maintenance and Specifications
To retrain the battery gauge:
1
Connect the main and remote testers together using
two channel adapters and a patch cord.
2
Connect the ac adapters to the main and remote
testers. Turn on both testers.
3
Turn the rotary switch to SPECIAL FUNCTIONS; then
select Battery Status. Verify that both the main and
remote battery gauges are shown. If the remote gauge
is missing, check the connections between the two
units.
4
Press
Train Battery.
5
To abort the retraining, hold down the power key (
on the main and remote testers until they turn off.
Retraining is complete when the testers have turned off
and the LED by the ac adapter connection is green.
9
Maintenance
)
9-5
Advertisement
Table of Contents
