Replace Windcups; Replace Directional Vane - La Crosse Technology 328-2314 Instructional Manual

Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw
Note: The screw in the wind cups will fit on the flat side of the
metal stem on the sensor.

Replace Directional Vane

1. Loosen the screw on side of vane
2. Remove direction vane
3. Install new vane
4. Tighten screw
Note: The directional vane attached to the stem on the sensor.
The screw will tighten to the flat side of the stem for a
secure fit.
Page | 23 www.lacrossetechnology.com/support 328-2314