La Crosse Technology 328-2314 Instructional Manual page 5

4. The mounting bracket has a square connection to prevent the
sensor from tipping.
5. Turn the knob to tighten the bracket to the pole.
TX232TH Sensor
1. Insert 2 AA batteries into the temperature/humidity sensor.
2. The red LED light will flash every 58 seconds when transmitting.
3. The transmission icon will show briefly when transmitting.
4. You can select a different channel on the sensor if you suspect
interference.
Note: Two hours after initial setup, the temperature/humidity
sensor will search for the Atomic time signal.
Transmission
Icon
Fahrenheit/
Celsius
Note: At temperatures below 14°F (-10°C) the sensor display will
turn off to protect the LCD. Sensor will still transmit data.
328-2314
Channel
Indicator
LED
Temperature
& Humidity
Alternate
www.lacrossetechnology.com/support
(Transmission
TX 1 2 3 °C/°F
Turn knob to
tight. Do not
over tighten
TX button
TX 1 2 3
°C/°F
Channel
Selector
Page | 4
F/C for
Sensor