Button Location Front Buttons Front View Alerts History Back View Top Buttons Heat/Dew Light (HI/LOW-OFF) Time Set Down Page | 1 www.lacrossetechnology.com/support Model: 327-1414W...
2. Insert three AAA batteries into the weather station (optional). 3. After 15 minutes, mount the sensor outside (position Wind Sensor). Initial Setup and Assembly - TX141W Sensor Twist battery cover left to remove from sensor. Twist Left Model: 327-1414W www.lacrossetechnology.com/support Page | 2...
Page 4
5. Insert pole into bottom of sensor and secure with two screws. Insert screws Connect Do not Screws into on each side the sensor overtighten designated of the sensor to the base screws holes Page | 3 www.lacrossetechnology.com/support Model: 327-1414W...
Page 5
Do not overtighten. Sensor Dimensions 7.10 6.08 1.43 3.54 2.84 (Top View) 18.57 4.67 Full Sensor and Bracket (with cup) Dimensions: 18.57” T x 7.10” W x 7.10” D (inch dimensions) 2.32 6.74 1.23 2.42 2.88 Model: 327-1414W www.lacrossetechnology.com/support Page | 4...
• to adjust value • Press ALERTS to confirm ALERT ACTIVATION • Press ALERTS button to toggle between alerts • Press to arm alerts • Press to disarm alerts • Press ALERTS to confirm Page | 5 www.lacrossetechnology.com/support Model: 327-1414W...
(spins with wind speed) Wind Speed History Top Speed Reading (past 60 minutes) Wind Speed Unit (MPH or KMH) Wind Speed Alert Current Speed (30 second average) Feels Like (Channel 1 only) Heat Index and Dew Point Model: 327-1414W www.lacrossetechnology.com/support Page | 6...
Settings: • Hold the TIME SET button to enter settings menu. • Move through settings with the TIME SET button. • The buttons will adjust settings. • Exit at anytime with the LIGHT button. Page | 7 www.lacrossetechnology.com/support Model: 327-1414W...
Page 9
Hawaiian 5. Choose 12 (default) or 24 hour time 6. Set Hours 7. Set Minutes 8. Set Year 9. Set Month 10. Set Date 11 Select MPH or KMH 12. Select Fahrenheit / Celsius Model: 327-1414W www.lacrossetechnology.com/support Page | 8...
Color Wind Speed Graph The wind speed graph with color sections is based on current wind speed. One segment will flash indicating current wind speed. Color Speed Blue 0 - 14 Yellow 15 - 19 Orange 20 - 24 COLOR WIND over 25 SPEED ICON The wind cup icon will spin at varying speeds according to the current speed.
(1, 2, or 3) before setting alerts for a sensor. Outdoor HI Humidity Outdoor LOW Humidity Wind Speed High Alert Outdoor LOW Temperature Outdoor HI Temperature Indoor HI Humidity Indoor LOW Temperature Indoor LOW Humidity Indoor HI Temperature Model: 327-1414W www.lacrossetechnology.com/support Page | 10...
• Press the LIGHT button on the top of the weather station to adjust the backlight (HI-LOW-OFF) when using AC power. When using battery power only: • Press the LIGHT button for a 10 second backlight (It will not stay on). Page | 11 www.lacrossetechnology.com/support Model: 327-1414W...
• Then, hold the button to manually reset MAX temperatures to current values. • Press the button again to view the MIN indoor/outdoor temperatures. • Then, hold the button to manually reset MIN temperatures to current values. Model: 327-1414W www.lacrossetechnology.com/support Page | 12...
• The wind station will automatically rotate through the channels for all connected sensors. • Press and release the button to lock the wind station into one channel. • Then press the button to view channels individually. Page | 13 www.lacrossetechnology.com/support Model: 327-1414W...
1. Insert your own mounting pole into the sensor. 2. Tighten screws 3. Mounting bracket would not be used. Note: Do not attempt to insert a pole into the hollow back of the mounting bracket. Model: 327-1414W www.lacrossetechnology.com/support Page | 14...
3. Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range. 4. For best WWVB reception, orientate the weather station with the front or back of the station facing Ft. Collins, Colorado. Page | 15 www.lacrossetechnology.com/support Model: 327-1414W...
1. Slide battery cover down and lift off sensor. 2. Remove old batteries and install fresh “AA” batteries. 3. Hold the button on the weather station for 5 seconds to search for the sensor. Model: 327-1414W www.lacrossetechnology.com/support Page | 16...
• If the product is not working properly, change the batteries and/or check the AC adapter connection. Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
Page 19
• Wind Station: 5.48” H x 8.34” L x 1.03” W (139.19 x 211.84 x 26.12 mm) Dimensions • TX141W Sensor: 18.57” H x 7.10” W x 7.10” D ( 471.68 x 180.34 x 180.34 mm) Model: 327-1414W www.lacrossetechnology.com/support Page | 18...
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Page | 19 www.lacrossetechnology.com/support Model: 327-1414W...