14). Optional: insert 3-AA batteries into the weather station. Thermo-hygro sensor Wind Speed sensor Weather Station TX141TH-BCH TX144W 327-1417 Power Cable 1 2 3 °C/°F Optional Note: Batteries are not included Red LED on sensors: Both sensors have a red LED light that flashes once during Back sensor signal transmission.
HAT: Hawaii-Aleutian Standard Time 7. Minutes 8. Year 9. Month 10. Date 11. Temperature (C/F) 12. Wind speed select (mph/kmh) Back Note: Press only one button at a time while in the settings menu. 327-1417 Color Wind Speed Weather Station Page | 4...
• The station will search for the atomic time signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. • Press and release the SET button to search manually for atomic time signal. • For information about WWVB visit: http://bit.ly/AtomicTime Back 327-1417 Color Wind Speed Weather Station Page | 5...
Current speed will blink. Example: 16 mph wind will show filled sections to 10 mph, and 15 mph color segment will flash. • The units (MPH/KMH) are setup in the settings menu. Back 327-1417 Color Wind Speed Weather Station Page | 6...
• Year: Defined by Calendar Year i.e. January 1 - December 31 Note: After 5 seconds all readings default back to the 1 hour top wind speed. 7 Days 24 Hours Year Month Back 327-1417 Color Wind Speed Weather Station Page | 7...
CH 1 CH 1 Indoor Temp LO Indoor Humidity HI Indoor Humidity LO Indoor Temp HI Feels Like LO Dew Point Feels Like HI CH 1 CH 1 CH 1 Back 327-1417 Color Wind Speed Weather Station Page | 8...
• Outdoor LOW Temperature ON/OFF • Outdoor LOW Temperature Value -40°F to 140°F (-40°C to 60°C) • Outdoor HIGH Temperature ON/OFF Back • Outdoor HIGH Temperature Value -40°F to 140°F (-40°C to 60°C) 327-1417 Color Wind Speed Weather Station Page | 9...
(2°F and 3% humidity) over the past 1 hour. E.g.: At 1:00 - compare to 12:00 data; at 1:15 compare to 12:15: at 1:30 - compare to 12:30 ….. etc Up Arrow: Rising Right Arrow: Steady Down Arrow: Falling Back 327-1417 Color Wind Speed Weather Station Page | 10...
• Press the LIGHT button on the top of the weather station to adjust the backlight (HI-LOW-OFF) when using the power cord. When using battery power only: • Press the LIGHT button for a 10 second backlight. Back 327-1417 Color Wind Speed Weather Station Page | 11...
• After 60 minutes, the station will begin to search for the missing signal automatically. • The signal strength indicators will flash while searching and be solid when connected. Back 327-1417 Color Wind Speed Weather Station Page | 12...
CH 3, in the outdoor temperature area. Note: When using multiple TH sensors, CH 1 select the channel by pressing the -/CH button prior to viewing HI | LO readings or setting temperature/humidity Alerts Back 327-1417 Color Wind Speed Weather Station Page | 13...
6. The sensor can be mounted from the bottom or Mounting pole side. Alternatively: 1. Insert your own mounting pole into the sensor. Mounting Bracket 2. Tighten screws 3. Mounting bracket would not be used. Side Mount Option Back 327-1417 Color Wind Speed Weather Station Page | 14...
Temperature/Humidity will show current readings. 5. In the absence of wind this reading will show 0.00. Dashes = Not connected to sensor 0 or current readings = Connected to sensor. Back 327-1417 Color Wind Speed Weather Station Page | 15...
• Always purchase the correct size and grade of battery most suitable for intended use. • Replace all batteries of a set at the same time • Promptly remove expired batteries. Back 327-1417 Color Wind Speed Weather Station Page | 16...
11.94” H x 6.24” W x 5.63” D (30.33 cm H x 15.85 cm W x 14.30 cm D) TX141TH-BCH sensor 5.12" H x 1.57" W x 0.79" D (13 cm H x 4.0 cm W x 2.0 cm D) Back 327-1417 Color Wind Speed Weather Station Page | 17...
Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support or visit our online help:...