Advertisement
BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
5. The reset gear is spring-loaded and must be positioned
correctly for the printer to accept a new cartridge. The starter
cartridge does not have a reset gear and the end cap blocked
us from adding a new one. Starter cartridges will need to have
a reset gear and replacement end cap before they can
be used.
6. Remove the black plastic spacer from the developer roller shaft.
Press in on the black tab to release.
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
