Advertisement
BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
Note that the gear teeth are not meshed when set, which is
how it should be. The gear is spring-loaded and will turn when
driven by the printer.
20. Install the gear cover plate as shown in the photo.
Make sure the black arrow on the cover is aligned with the
white arrow marked #3. This applies both to the TN410 and
the TN420 cartridges. This is not the case for the TN450,
which has different gears.
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
