Advertisement
21. On non-gear side, install the plastic arms and their corresponding screws.
The smaller arm is installed last, and must be turned from the bottom up, so that the lock engages.
22. Fill the cartridge with the proper gram load of black
toner
for
use
in
the
(approximately 45 grams).
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
Brother
TN410
cartridge
23. Replace the fill plug.
Wipe the cartridge down to remove any toner dust.
www.uninetimaging.com
Advertisement
