Download Print this page

Brother TN410 Cartridge Remanufacturing Instructions page 3

Toner

Advertisement

BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
Difference between the TN410 (upper cartridge) and TN420 (lower cartridge)
The fuser assembly, the paper feed assembly, and the laser unit, possess a duty cycle of 50,000 pages. The printer also has a
50,000-page duty cycle; basically, when these parts wear out, so does the printer.
There is a reset gear that resets the machine's counters every time a new toner cartridge is installed. In order utilize the TN410
starter cartridge again, a special gear (called a flag gear) must be installed, and the left side must also be replaced with one that
shows three actuator flags on it.
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com

Advertisement

loading