Advertisement
BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
13. Inspect the magnetic roller felts. If they are
14. Carefully wipe the doctor blade down with a lint-free cloth.
compressed (shiny), rough them up with a small jeweler's
screwdriver.
Be careful not to bend or damage the blade in any way.
Install the blade and two screws.
15. Clean the developer roller with a lint-free cloth and a dedicated developer roller cleaner for use on Brother rollers. Do not
use any chemicals other than a dedicated Brother roller cleaner. Reinstall the developer roller (long shaft side to the gear side),
with the white lock pointing up. Turn the lock towards the doctor blade until it locks in place.
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
