Advertisement
BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
16. Install the non-gear side axle plate.
Make sure the tabs lock in place.
17. Clean the gears, making sure they have no toner on them. This is a good time to also check the gear shafts to make sure
there is enough grease. If the shafts appear dry, or the grease is contaminated with toner, clean the shaft and inside the gear.
Replace the grease with white lithium grease. Install the developer roller gear, "E" ring, black axle spacer, and the rest of the gears
in the order shown. Make sure all the gears are meshing properly.
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
