Advertisement
BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
1. Vacuum the exterior of the cartridge. Remove the fill plug
from the toner cartridge. Dump of the remaining toner and
vacuum/blow out the cartridge.
2. Remove the two screws on the non-gear side of the developer roller.
Remove the two plastic arms shown.
The smaller arm must be turned in order to release the lock.
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
