Templates; Supported Control Functions; Overview Of The Templates, Control Functions And Blocks - Siemens SIMOCODE DP Programming And Operating Manual

Templates

2.1

Supported control functions

The library supports all SIMOCODE DP control functions. SIMO_CHN block is used to control the
motor and communicate with SIMOCODE DP device.
This Library supports the following control functions
Table 2-1
No.
1
2
3
4
5
6
7
8
9
2.2

Overview of the templates, control functions and blocks

The templates of this library can be adopted unchanged to implement control functions in your
project. The templates thus simplify the engineering for configuring the blocks and they support
their problem-free functioning.
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003
Supported Control Functions
Control functions
Overload Relay
Direct starter
Reversing starter
Star-delta starter
Dahlander starter
Pole changing starter
Solenoid Valve
Positioner
Soft starter
SIMOCODE DP
✓
✓
✓
✓
✓
✓
✓
✓
✓
2
31