Maintenance Station
5.2 Maintenance Station Block Icons
5.2
Maintenance Station Block Icons
SIMOCODE DP Standard Diagnostics – Maintenance Station
Display
82
Remark
Message
Unknown/untested
-
Trip
Device [Subnet No.]/[Ad‐
dress]: Bad, maintenance
alarm
Failure
Device [Subnet No.]/[Ad‐
dress]: Failure
Warning
Device [Subnet No.]/[Ad‐
dress]: Uncertain, mainte‐
nance demanded
Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003
Caused by
PLC in Standby
Fault
•
Earth fault
•
Overload
•
Overload and asymmetry
•
I1/I2 threshold exceeded/fallen below
•
Thermistor
•
"CS On/Off"
•
Motor stalled
•
Positioner stalled
•
Double "0"/"1" error on positioner
•
End position reached
•
Non-Equivalence fault, Positioner
•
Ready to start
•
Operational Protection off
•
Undervoltage off
•
External error 1/2
•
Check-Back signal test
•
Runtime error when switching on/off
Failure of PROFIBUS connection
Warnings
•
External warning
•
Asymmetry > 40%
•
Short Circuit in sensor line
•
Earth fault
•
Overload
•
Overload and asymmetry
•
I1/I2 threshold exceeded/fallen below
•
Thermistor
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2