GENESIS® T8 Series SmartTrax™
ICP Intuitive Control Panel
Constant engine speed: press button 1 or 2 actual engine
speed is saved constant speed function is activated. Fine
adjustment with arrow keys
Headland Turning Sequence:
•
Recording
•
Automatic or sequential
control
Hydraulic top link and lift rod
controls (if fitted)
Front and rear arms
raise/lower fine
Auto PTO
Slip control activation
Components
adjust
Traction management: automatic or
permanent engagement of 4wd and diff-lock
Deceleration function
Joystick control selects which
remotes are operated by the
joystick
Front axle suspension. Locks
suspension below 12km/h,
keep button pressed for 3 sec
toggle between suspension
stiffness hard/medium/soft
Manual mode M: Turns of the
ground speed management
(GSM)
3