Table of Contents
Advertisement
3.1 Endownment and unpacking
The machine is supply with:
1 x Basic Unit X-Rot
1 x Radio Control
2 x Lithium battery for Radio control
1 x Battery charger
1 x Radio control's hanging belt
1 x User Manual & Engine user manual
1 x Keys Kit
Before operating the machine, check the fuel and engine oil levels and carefully read the
operating instructions for safety regulations and procedures for starting and controlling
the machine.
3.2 PRELIMINARY TESTS
Before to use the machine for the first time, it is necessary to verify:
• Engine oil level (see Cap. 7.1.1)
• Fuel level in the tank (see Cap. 7.1.3)
• Battery charge on the Radio receiver (see Cap. 7.1.5)
- The engine oil should be always on the mark of the upper level. Lack of oil will
decrease the engine performance on the slope.
- The fuel level should be near to the max but not reaching the collar of the tank. In
case of slope the fuel can spill out and create a danger of fire.
- The 2 battery set have to be charged before to start any work. One battery should be
enough for one day operation but the 2nd one is required in case of need.
SECTION 3 - MACHINE PREPARATION
3 - MACHINE PREPARATION
Fig. 6
15
Advertisement
Table of Contents
