Table of Contents
Advertisement
WARNING:
Do not work in slopes over the limits Stability and engine lubric. can be lost
DANGER : RISK OF INJURY
On a slope, stay below never above the machine.
CONDITIONS AND PROPER USE
1)
Before starting the engine, be sure that the SAFETY DEVICES are well working and
fitting. Without these cares the operator might work in a danger situation.
2)
This machine has been designed and manufactured for being used by one operator
only who hold the Radiocontrol. Any other use is not permitted!
3)
It is important to ensure a safe distance between the operator and the machine in the
Work Field (see cap.5.12)
4)
Before the machine is operating, read the Use and Maintenance manual thoroughly,
so that you are fully aware of all the operating controls and safety aspects of the
machine.
5) No modification to the machine or use of not genuine spare parts can be done without
the Manufacturer consent. This praxis can lead to very dangerous and unpredictable
situation and will anyway nullify the warranty.
6)
Do not under any circumstances transport people or objects on the machine.
7)
Before use, check that all the controls and safety components are assembled and in
good condition (see chapter 2.1)
8)
Move the controls gradually; sudden engagement could cause the loose of stability
of the machine.
9) Check anytime that all the parts all well fixed
10) This machine have not to be used by children or inexperienced persons. Operators
that are not duly trained of people that are under effect of alcohol or other substances.
11) Before operating the machine, check that the area is clear and free of debris and
that there are no people within the Work Field. The operator will be held responsible
for the safety of third parties, if these are found within the Work Field. Stop work in
these cases.
12
2 - SAFETY NORMS
SECTION 2 - SAFETY NORMS
Sicuro
Pericolo
Advertisement
Table of Contents
