Table of Contents
Advertisement
12) Do not use the machine when you are tired
13) Keep away from cutting blades at all times while the machine is in operation. Observe
carefully to avoid the danger area (See chap. 5.12).
14) Use only genuine spare parts and accessories especially the safety parts (chap.2.1)
to guarantee the safety and the function of the machine.
15) Stop engine before refuelling
16) Handle the fuel with care to avoid spilling on the machine; clean any spillage
immediately.
17) Avoid overfilling the fuel tank
18) Plan well your work before starting
19) The area next to the engine exhaust will most likely reach temperatures above 80°.
ATTENTION: Danger of scalding.
20) Keep the area of work clear and clean.
21) Only use the machine in clear visibility.
22) If you hit any objects during the work, stop the machine and check for any damage
immediately. For the blade and blade's fasteners integrity refer to par.7.1.6
23) It is advisable to keep a first aid kit handy.
24) The speed of the machine must be convenient to the environment conditions
25) Never do maintenance or cleaning works when the engine running.
26) When possible, avoid working up or down-hill. Always travel across the slope.
27) Do not work on very steep slopes more than 100% (max.45°).
28) During use, keep the hot sections of the engine (i.e. cylinder head, exhaust, etc.)
clean to avoid a stack-up of debris that will overheat the engine.
2 - SAFETY NORMS
SECTION 2 - SAFETY NORMS
13
Advertisement
Table of Contents
