Table of Contents
Advertisement
3.Maintenance
3-1.Notice
Do not use the RAID function of this product when connecting disk array device to this
product.
Notice
3-2.Troubleshooting
If your operating system or applications do not operate correctly after installing this product, please
check the following items.
Is this product installed in the server correctly?
Is all SAS device turned on?
Are all SAS cables and power cords connected correctly?
Is the driver installed?
Notice
Do not install an operating system in the device connected to this product.
Do not use the RAID function of this product when connecting disk array device to
this product.
Do not connect this product to a server or SAS device that is not recommended by
NEC Corporation. If the product is connected to a server or SAS device that is not
recommended by NEC Corporation, the product may malfunction or fail.
Please contact the retailer or service center for the information on recommended
servers and or SAS devices.
If the server does not work correctly even when all the above items are confirmed,
shut down the server, disconnect the product, reboot the server, and perform the
self-diagnostic program POST. If POST ends normally, this product may be
defective. Please contact your retailer or service center for repair.
- 28 -
Advertisement
Table of Contents
