Safety Notes - NEC N8103-197 User Manual

Safety Notes

This section provides notes on using the product safely. Read this section carefully to ensure proper and
safe use of the product. For symbols, see (Safety Indications).
Do not use the product for services where critical high availability may directly
affect human lives or high reliability is required.
This product is not intended to be used for control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics and
space devices, transportation facilities and devices; and facilities and devices requiring
high reliability. We assume no liability for any accident resulting in personal injury,
death, or property damage if the product has been used in the above conditions.
Do not disassemble, repair, or alter the product.
Do not disassemble, repair, or alter the product.
Never attempt to disassemble, repair, or alter the product on any occasion other than
described in this document. Failure to follow this instruction may cause an electric
shock or fire as well as malfunctions of the product.
Disconnect the power plug before working with the product.
Make sure to power off the product and disconnect the power plug from a power outlet
before installing/removing this product. Touching any internal component or
cable/connector with its power cord connected to a power source may cause an
electric shock or a fire due to short-circuit, even if the product is off-powered.
Also make sure that your hands are not wet when installing/removing the product.
Failure to follow this instruction may cause an electric shock as well as malfunctions of
the product.
Do not use the product if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the product and disconnect the
power plug from the outlet, then contact the store where you purchased the product or
your maintenance service company. Using the product in such conditions may cause a
fire.
WARNING
- 7 -