Specifications - Billy Goat SC181H Operator's Manual

Problem Possible Cause
Engine is locked and Oil is present in the
will not pull over. engine cylinder.
Engine is damaged.
Belt continuously slips. Belt is too worn.
Clutch cable out of
adjustment.
Conditions are too poor
for deep cutting.
Poor cutting Worn or damaged
performance. blade.
Blade is locked with
debris.
Engine speed is too low.
Conditions are too poor
for deep cutting.
Drive will not engage or Return-to-neutral
will not release. mechanism is out of
adjustment.
Drive cable out of
adjustment.
Drive lever is damaged.

Specifications

DIMENSIONS
Overall Length
Overall Width
Overall Height
Total Unit Weight* (SC181H,
SC181HG)
Total Unit Weight* (SC181K,
SC181KG)
Maximum Operating Slope
ENGINE
Fits Units:
Type:
Model:
Oil Capacity:
Fits Units:
Type:
Model:
Oil Capacity:
*Unit is weighed with an engine that has oil, but no fuel
added.
10
Solution
Remove sparkplug and
turn engine over to clear
oil out. Refer to the
engine manufacturer
owner's manual.
Refer to engine
manufacturer owner's
manual or contact your
Authorized Service
Dealer.
Replace belt.
Adjust the clutch cable.
Dampen the area to be
cut.
Replace blade and
blade hardware.
Clean blade of debris.
Increase engine speed.
Dampen the area to be
cut.
Adjust the Return-to-
neutral mechanism.
Adjust the drive cable.
Replace the damaged
drive lever.
60" (152 cm)
26.5" (67.3 cm)
38.5" (97.8 cm)
395 lb (179.2 kg)
397 lb (180.1 kg)
20°
SC181H, SC181HG
Honda
GXV160UH2N1XB
0.69 qt. (0.65 L)
SC181K, SC181KG
Kohler
CV200
0.625 qt. (0.59 L)
billygoat.com